Description
Gold Wing Tour Right Dual Hole Flag Mount – Black Trunk Bracket
Gold Wing Tour Right Dual Hole Flag Mount from PANICAL is designed for compatible 2021–2026 Honda Gold Wing GL1800 Tour models, providing a dedicated right-side accessory mounting bracket near the rear trunk and passenger backrest. Unlike single-hole flag mounting brackets, this version features two keyhole-shaped attachment slots on its extended mounting plate. The dual-hole configuration provides a connection layout for suitable motorcycle flag holder assemblies and selected accessory mounting components when their fastening dimensions and installation requirements are compatible.
The main bracket is manufactured from 304 stainless steel using laser cutting and die forming, followed by black electrostatic spray coating. Its stepped metal profile features two circular vehicle-side mounting openings and two keyhole-shaped accessory attachment slots. The supplied product illustrations indicate an approximate size of 3.54 inches wide and 4.09 inches high, with a material thickness of approximately 3 mm. A separate installation illustration specifies a maximum load of 400 g and a maximum accessory height of 19 cm, subject to the appropriate mounting configuration. The package includes one black right-side bracket and stainless-steel mounting hardware. Flag poles, flags and external accessory assemblies are not included.
Provides an accessory mounting base near the right side of the rear trunk and passenger backrest of compatible 2021–2026 Honda Gold Wing Tour motorcycles.
Features two keyhole-shaped attachment slots that form a connection layout for compatible flag holder assemblies and mounting components.
The stepped metal profile connects the vehicle-side fastening area with the extended accessory attachment plate.
The main mounting bracket uses 304 stainless steel with an illustrated material thickness of approximately 3 mm.
The shaped bracket provides a dedicated attachment area near the passenger backrest without requiring a large external mounting platform.
The electrostatic spray-coated exterior complements the motorcycle’s dark passenger seat, rear trunk trim and surrounding components.
The main mounting body is manufactured from 304 stainless steel according to the supplied product specification.
The metal bracket is laser cut to form its outer profile, circular mounting openings and keyhole-shaped attachment slots.
The bracket is formed to create its stepped mounting profile and the intended separation between the fastening and accessory connection areas.
The stainless-steel body receives a black electrostatic spray-coated surface treatment.
The bracket is configured for the corresponding right-side rear trunk installation position and differs from the left-side version.
The extended plate provides two accessory connection slots. This design does not automatically permit two independent flag poles or accessories to be installed together.
The supplied material detail image indicates approximately 3 mm of stainless-steel plate thickness.
The dimensional illustration indicates an approximate width of 3.54 inches and an overall height of 4.09 inches.
The installation illustration specifies a maximum load of 400 g and a maximum accessory height of 19 cm. Confirm the mounting conditions and height reference before selecting an accessory.
The mounting kit includes stainless-steel installation components for the intended bracket assembly.
The Gold Wing Tour Right Dual Hole Flag Mount is intended for compatible 2021–2026 Honda Gold Wing Tour models with the corresponding rear trunk and passenger backrest mounting arrangement. It is not intended for motorcycles without the required rear trunk structure. The Gold Wing Tour rear trunk and passenger backrest were revised for the 2021 model year, so compatibility with the earlier 2018–2020 mounting arrangement should not be assumed. Confirm the motorcycle model year, right-side mounting points and accessory connection dimensions before installation.
This product includes one black right-side dual-hole stainless-steel mounting bracket and its supplied installation hardware. A left-side bracket, flag pole, flag and other external accessories are not included.
The two keyhole-shaped slots form part of the bracket’s accessory connection layout. They do not automatically allow two separate flag poles or independent accessory assemblies to be installed simultaneously. Check that any selected holder or adapter matches the mounting slot dimensions and fastening requirements.
The supplied installation image specifies a maximum load of 400 g and a maximum accessory height of 19 cm. These limits must be considered together with the installed accessory arrangement. The exact reference point for the height measurement has not been specified. Do not assume that long flag poles, tall antennas or accessories creating excessive leverage are suitable for this bracket.
Install the bracket at the designated right-side rear trunk mounting position using suitable hardware. Secure all fastening components and confirm that the bracket and attached accessories do not interfere with trunk operation, the passenger backrest, passenger movement or surrounding bodywork. Inspect the installation periodically, particularly after riding with an attached accessory.
Clean the black electrostatic spray-coated surface using a soft cloth and mild cleaning solution. Avoid abrasive materials or harsh chemicals that may damage the coating.
There are no reviews yet.